QSFP-100GBASE-SR4
100GBASE-SR4 QSFP28 transceiver, 850 nm, multimode, MPO-12
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QSFP-100GBASE-SR4 at a glance
- 100GBASE-SR4 QSFP28 transceiver
- 850 nm over multimode fibre (MMF)
- Reach: 70 m on OM3 · 100 m on OM4
- Connector: MPO-12
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 5 Juniper platform families (see Compatibility)
Specifications
| Part number | QSFP-100GBASE-SR4 |
|---|---|
| Brand | Juniper |
| Standard | 100GBASE-SR4 |
| Form factor | QSFP28 |
| Data rate | 100 Gb/s |
| Wavelength | 850 nm |
| Media | Multimode fibre (MMF) |
| Reach | 70 m on OM3 · 100 m on OM4 |
| Connector | MPO-12 |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper EX4400
- Juniper QFX5130-32CD
- Juniper QFX5230-64CD
- Juniper MX204
- Juniper MX304
Description
A second 100GBASE-SR4 QSFP28 entry, part code 740-058734, described by Juniper as supporting the Ethernet rate only. Its compatibility list leans toward routing, security and carrier-switch platforms, so it fits router-to-switch and firewall-to-core connections in a machine room. The 840 to 860 nm transmitter and MPO-12 interface reach 70 m on OM3 or 100 m on OM4. The module reports diagnostics and operates from 0 to 70 degrees C. Cabling for QSFP-100GBASE-SR4: use a multimode trunk with MPO-12 connectors and correct polarity, OM3 or OM4. The headline reach is 70 m on OM3 · 100 m on OM4, so measure the installed link loss before ordering. The host needs a free QSFP28 cage that runs at 100G; Juniper's tool names EX4400, QFX5130-32CD, QFX5230-64CD among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Server and storage links to a top-of-rack switch
- Switch-to-switch links inside one data hall or comms room
- Building risers that already have OM3/OM4 multimode fibre
Before you order
- Confirm your switch or router model and software release support the QSFP-100GBASE-SR4
- Use OM3 or OM4 multimode patch cords; reach drops sharply on OM1/OM2
- Parallel optics need MPO/MTP trunk or breakout cabling with the right polarity
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the QSFP-100GBASE-SR4?
70 m on OM3 · 100 m on OM4.
What fibre does the QSFP-100GBASE-SR4 use?
It runs over multimode fibre (MMF) with a MPO-12 connector at 850 nm.
Is the QSFP-100GBASE-SR4 genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QSFP-100GBASE-SR4?
Juniper lists it for platform families including Juniper EX4400, Juniper QFX5130-32CD, Juniper QFX5230-64CD, Juniper MX204. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.