QFX-SFP-DAC-10MA
10G DAC direct-attach cable, 10 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QFX-SFP-DAC-10MA at a glance
- 10G DAC 10 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | QFX-SFP-DAC-10MA |
|---|---|
| Brand | Juniper |
| Standard | 10G DAC |
| Form factor | DAC |
| Data rate | 10 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 10 m cable |
| Connector | fixed (cable) |
| Cable length | 10 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10008
- Juniper EX4600
- Juniper ACX7020
- Juniper PTX10008
- Juniper SRX4700
- Juniper QFX10016
- Juniper EX4650
- Juniper ACX7100
Description
This 10 m cable (QFX-SFP-DAC-10MA) joins two SFP+ ports with active twinax copper, so no separate optics are needed. At 10 m the cable can serve links between distant racks or across an aisle, where cable-tray routing matters. Supported platforms are published per model, so confirm yours in the Juniper compatibility tool and do not assume a neighbouring model is covered. Both ends must be set to 10G operation on the host ports. The compatibility tool shows 740-037252 as the underlying part number. It suits server-to-switch links within a rack, including QFX and EX access switches with SFP+ cages. Genuine Juniper part, new and factory sealed. The conductor is 28 AWG twinax. Juniper's data gives a maximum power draw of 0.627 W. There is no optical monitoring, since the link is electrical end to end.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the QFX-SFP-DAC-10MA
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the QFX-SFP-DAC-10MA?
The QFX-SFP-DAC-10MA is a 10 m copper DAC with the plugs permanently attached.
Is the QFX-SFP-DAC-10MA genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QFX-SFP-DAC-10MA?
Juniper lists it for platform families including Juniper QFX10008, Juniper EX4600, Juniper ACX7020, Juniper PTX10008. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.