EX-SFP-10GE-DAC-1M
10G DAC direct-attach cable, 1 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
EX-SFP-10GE-DAC-1M at a glance
- 10G DAC 1 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | EX-SFP-10GE-DAC-1M |
|---|---|
| Brand | Juniper |
| Standard | 10G DAC |
| Form factor | DAC |
| Data rate | 10 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 1 m cable |
| Connector | fixed (cable) |
| Cable length | 1 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10008
- Juniper EX2300
- Juniper ACX5448
- Juniper PTX10008
- Juniper MX204
- Juniper SRX1500
- Juniper NFX150
- Juniper QFX10016
Description
The EX-SFP-10GE-DAC-1M is a twinax copper cable, 1 m long, with an SFP+ connector permanently attached at each end. This is a genuine Juniper part, new in its sealed bag. In the Juniper compatibility tool it carries part number 740-030076. Look up your exact device and operating-system release in Juniper's compatibility data first; not every port or line card is listed. A 1 m run is typically used within a single rack, for example between a top-of-rack switch and a nearby device. It suits server-to-switch links within a rack, including QFX and EX access switches with SFP+ cages. Both ends must be set to 10G operation on the host ports. It reports no optical diagnostics, as there is no laser in the path. Operating temperature is listed as 0° C to 70° C. Juniper's data gives a maximum power draw of 0.5 W.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the EX-SFP-10GE-DAC-1M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the EX-SFP-10GE-DAC-1M?
The EX-SFP-10GE-DAC-1M is a 1 m copper DAC with the plugs permanently attached.
Is the EX-SFP-10GE-DAC-1M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the EX-SFP-10GE-DAC-1M?
Juniper lists it for platform families including Juniper QFX10008, Juniper EX2300, Juniper ACX5448, Juniper PTX10008. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.