EX-SFP-10GE-DAC-5M
10G DAC direct-attach cable, 5 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
EX-SFP-10GE-DAC-5M at a glance
- 10G DAC 5 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | EX-SFP-10GE-DAC-5M |
|---|---|
| Brand | Juniper |
| Standard | 10G DAC |
| Form factor | DAC |
| Data rate | 10 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 5 m cable |
| Connector | fixed (cable) |
| Cable length | 5 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10008
- Juniper EX2300
- Juniper ACX5448
- Juniper PTX10008
- Juniper MX204
- Juniper SRX4700
- Juniper NFX150
- Juniper QFX10016
Description
The EX-SFP-10GE-DAC-5M is a twinax copper cable, 5 m long, with an SFP+ connector permanently attached at each end. Genuine Juniper part, new and factory sealed. Wire gauge is listed as 24 AWG, which sets how stiff the cable feels. The compatibility tool shows 740-031838 as the underlying part number. Typical use is linking servers and storage to the top-of-rack switch at 10G. Look up your exact device and operating-system release in Juniper's compatibility data first; not every port or line card is listed. Power draw is listed at up to 0.5 W. There is no optical monitoring, since the link is electrical end to end. At 5 m the cable can span adjacent cabinets, with enough length to loop through a cable manager. Both ends must be set to 10G operation on the host ports.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the EX-SFP-10GE-DAC-5M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the EX-SFP-10GE-DAC-5M?
The EX-SFP-10GE-DAC-5M is a 5 m copper DAC with the plugs permanently attached.
Is the EX-SFP-10GE-DAC-5M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the EX-SFP-10GE-DAC-5M?
Juniper lists it for platform families including Juniper QFX10008, Juniper EX2300, Juniper ACX5448, Juniper PTX10008. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.