JNP-SFP-25G-LR
25GBASE-LR SFP28 transceiver, 1310 nm, single-mode, LC duplex
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-SFP-25G-LR at a glance
- 25GBASE-LR SFP28 transceiver
- 1310 nm over single-mode fibre (SMF)
- Reach: 10 km on SMF
- Connector: LC duplex
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-SFP-25G-LR |
|---|---|
| Brand | Juniper |
| Standard | 25GBASE-LR |
| Form factor | SFP28 |
| Data rate | 25 Gb/s |
| Wavelength | 1310 nm |
| Media | Single-mode fibre (SMF) |
| Reach | 10 km on SMF |
| Connector | LC duplex |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper EX4400
- Juniper EX4100
- Juniper EX4650-48Y
- Juniper QFX5120-48Y
- Juniper QFX5130-48C
- Juniper MX304
- Juniper ACX7024
- Juniper SRX4300
Description
A 25GBASE-LR SFP28 for single-mode fibre, Juniper part code 740-071562. Common roles are 25G mobile fronthaul and aggregation, links between data halls and campus uplinks from SFP28 equipped access devices. The transmitter works in the 1295 to 1325 nm band and reaches 10 km over duplex LC single-mode cabling. It reports optical power through diagnostics and is rated 0 to 70 degrees C. Cabling for JNP-SFP-25G-LR: use a duplex single-mode (OS2) patch cable with LC connectors. The headline reach is 10 km on SMF, so measure the installed link loss before ordering. The host needs a free SFP28 cage that runs at 25G; Juniper's tool names EX4400, EX4100, EX4650-48Y among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Campus links between buildings over single-mode fibre
- Data-centre interconnects between halls or floors
- Aggregation and core uplinks where multimode reach is not enough
Before you order
- Confirm your switch or router model and software release support the JNP-SFP-25G-LR
- Use single-mode (OS2) fibre and check the link budget for the full span
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the JNP-SFP-25G-LR?
10 km on SMF.
What fibre does the JNP-SFP-25G-LR use?
It runs over single-mode fibre (SMF) with a LC duplex connector at 1310 nm.
Is the JNP-SFP-25G-LR genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-SFP-25G-LR?
Juniper lists it for platform families including Juniper EX4400, Juniper EX4100, Juniper EX4650-48Y, Juniper QFX5120-48Y. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.