JNP-SFP-25G-DAC-3M
25G DAC direct-attach cable, 3 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-SFP-25G-DAC-3M at a glance
- 25G DAC 3 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-SFP-25G-DAC-3M |
|---|---|
| Brand | Juniper |
| Standard | 25G DAC |
| Form factor | DAC |
| Data rate | 25 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 3 m cable |
| Connector | fixed (cable) |
| Cable length | 3 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5120
- Juniper EX3400
- Juniper ACX7020
- Juniper MX304
- Juniper SRX1600
- Juniper QFX5130
- Juniper EX4100
- Juniper ACX7024
Description
A 3 m twinax copper assembly, JNP-SFP-25G-DAC-3M carries 25GBASE-CR between SFP28 ports with the connectors moulded onto the cable. Before ordering, look up the exact switch or router model and Junos release in the Juniper Hardware Compatibility Tool, since support differs by platform and port type. It is intended for server-to-switch connections in spine-leaf data-centre designs. Host ports at both ends must run at 25G. Juniper records the part under number 720-084605. Juniper's data gives a maximum power draw of 0.5 W. Power draw is listed at up to 0.5 W. Juniper lists an operating temperature of 0° C to 70° C. This is a genuine Juniper part, new in its sealed bag. With only 3 m of cable, this one is meant for short, tidy connections close to the switch.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the JNP-SFP-25G-DAC-3M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-SFP-25G-DAC-3M?
The JNP-SFP-25G-DAC-3M is a 3 m copper DAC with the plugs permanently attached.
Is the JNP-SFP-25G-DAC-3M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-SFP-25G-DAC-3M?
Juniper lists it for platform families including Juniper QFX5120, Juniper EX3400, Juniper ACX7020, Juniper MX304. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.