JNP-QSFP-DACBO-7MA
40G to 4x10G DAC direct-attach cable, 7 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-QSFP-DACBO-7MA at a glance
- 40G to 4x10G DAC 7 m direct-attach copper cable
- Industrial temperature rating (typically -40 to 85 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-QSFP-DACBO-7MA |
|---|---|
| Brand | Juniper |
| Standard | 40G to 4x10G DAC |
| Form factor | DAC |
| Data rate | 40 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 7 m cable |
| Connector | fixed (cable) |
| Cable length | 7 m |
| Digital optical monitoring | Not supported |
| Temperature range | Industrial (IND) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10002
- Juniper EX4400
- Juniper ACX5448
- Juniper SRX2300
- Juniper QFX10008
- Juniper SRX4120
- Juniper QFX10016
- Juniper SRX4300
Description
JNP-QSFP-DACBO-7MA is a 7 m active breakout cable: a single QSFP+ plug on one end splits into four SFP+ plugs on the other. The internal Juniper part number shown for it is 740-053203. Each of the four legs is a separate 10G link, so one QSFP+ port can feed four servers. Juniper's data gives the wire gauge as 30 AWG. Stocked as a genuine, new, sealed Juniper item. It is worth checking the Juniper Hardware Compatibility Tool for your specific chassis and software version, as listings are made model by model. At 7 m the cable can span adjacent cabinets, with enough length to loop through a cable manager. The QSFP+ port must be configured for channelised 4x10G operation, and each SFP+ leg then behaves as an independent 10G port. The conductor is 30 AWG twinax. Power draw is listed at up to 2.5 W.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the JNP-QSFP-DACBO-7MA
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-QSFP-DACBO-7MA?
The JNP-QSFP-DACBO-7MA is a 7 m copper DAC with the plugs permanently attached.
Is the JNP-QSFP-DACBO-7MA genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-QSFP-DACBO-7MA?
Juniper lists it for platform families including Juniper QFX10002, Juniper EX4400, Juniper ACX5448, Juniper SRX2300. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.