JNP-QSFP-DACBO-5MA
40G to 4x10G DAC direct-attach cable, 5 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-QSFP-DACBO-5MA at a glance
- 40G to 4x10G DAC 5 m direct-attach copper cable
- Industrial temperature rating (typically -40 to 85 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-QSFP-DACBO-5MA |
|---|---|
| Brand | Juniper |
| Standard | 40G to 4x10G DAC |
| Form factor | DAC |
| Data rate | 40 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 5 m cable |
| Connector | fixed (cable) |
| Cable length | 5 m |
| Digital optical monitoring | Not supported |
| Temperature range | Industrial (IND) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10002
- Juniper EX4400
- Juniper ACX5448
- Juniper SRX2300
- Juniper QFX10008
- Juniper SRX4120
- Juniper QFX10016
- Juniper SRX4300
Description
The JNP-QSFP-DACBO-5MA turns one 40G QSFP+ port into four 10 Gigabit Ethernet SFP+ links over 5 m of twinax copper. Operating temperature is listed as –40° C to 85° C. Compatibility is decided per platform and release, so verify your exact model in Juniper's online tool before placing an order. Its Juniper part number in the compatibility data is 740-044967. Juniper's data gives a maximum power draw of 2.5 W. The QSFP+ port must be configured for channelised 4x10G operation, and each SFP+ leg then behaves as an independent 10G port. The 5 m length is a common choice for end-of-row or neighbouring-rack connections. Stocked as a genuine, new, sealed Juniper item. Each of the four legs is a separate 10G link, so one QSFP+ port can feed four servers. The conductor is 30 AWG twinax.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the JNP-QSFP-DACBO-5MA
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-QSFP-DACBO-5MA?
The JNP-QSFP-DACBO-5MA is a 5 m copper DAC with the plugs permanently attached.
Is the JNP-QSFP-DACBO-5MA genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-QSFP-DACBO-5MA?
Juniper lists it for platform families including Juniper QFX10002, Juniper EX4400, Juniper ACX5448, Juniper SRX2300. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.