JNP-QSFP-DAC-10MA
40G DAC direct-attach cable, 10 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-QSFP-DAC-10MA at a glance
- 40G DAC 10 m direct-attach copper cable
- Industrial temperature rating (typically -40 to 85 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-QSFP-DAC-10MA |
|---|---|
| Brand | Juniper |
| Standard | 40G DAC |
| Form factor | DAC |
| Data rate | 40 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 10 m cable |
| Connector | fixed (cable) |
| Cable length | 10 m |
| Digital optical monitoring | Not supported |
| Temperature range | Industrial (IND) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10002
- Juniper EX4300
- Juniper SRX2300
- Juniper QFX10008
- Juniper EX4400
- Juniper SRX4120
- Juniper QFX10016
- Juniper EX4600
Description
The JNP-QSFP-DAC-10MA is a 10 m twinax copper cable with a QSFP+ plug on each end, intended for single 40G links. Both ports need to be set up for 40G, not for breakout mode. Operating temperature is listed as –40° C to 85° C. Typical use is a 40G uplink or switch-to-switch link inside a data-centre row. In the Juniper compatibility tool it carries part number 740-053202. With 10 m available, it can cross a row or aisle; allow for the full routed length rather than the straight-line distance. Stocked as a genuine, new, sealed Juniper item. Listed maximum power is 0.058 W. Juniper's data gives the wire gauge as 28 AWG. Compatibility is decided per platform and release, so verify your exact model in Juniper's online tool before placing an order.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the JNP-QSFP-DAC-10MA
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-QSFP-DAC-10MA?
The JNP-QSFP-DAC-10MA is a 10 m copper DAC with the plugs permanently attached.
Is the JNP-QSFP-DAC-10MA genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-QSFP-DAC-10MA?
Juniper lists it for platform families including Juniper QFX10002, Juniper EX4300, Juniper SRX2300, Juniper QFX10008. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.