JNP-QSFP-100G-SR4
100GBASE-SR4 QSFP28 transceiver, 850 nm, multimode, MPO-12
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-QSFP-100G-SR4 at a glance
- 100GBASE-SR4 QSFP28 transceiver
- 850 nm over multimode fibre (MMF)
- Reach: 70 m on OM3 · 100 m on OM4
- Connector: MPO-12
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-QSFP-100G-SR4 |
|---|---|
| Brand | Juniper |
| Standard | 100GBASE-SR4 |
| Form factor | QSFP28 |
| Data rate | 100 Gb/s |
| Wavelength | 850 nm |
| Media | Multimode fibre (MMF) |
| Reach | 70 m on OM3 · 100 m on OM4 |
| Connector | MPO-12 |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper EX4400
- Juniper QFX5120-48Y
- Juniper QFX5130-32CD
- Juniper QFX5230-64CD
- Juniper QFX5700
- Juniper MX204
- Juniper MX304
- Juniper ACX7100-32C
Description
A 100 Gigabit QSFP28 short-reach module with four 25G lanes on parallel multimode fibre, Juniper part code 740-061405. It links leaf and spine switches, aggregation routers and 100G server uplinks within a data hall, and Juniper marks it breakout capable for 4x25G on supported hosts. Reach is 70 m on OM3 and 100 m on OM4 using an MPO-12 cable. Maximum power is 3.5 W, the operating range is 0 to 70 degrees C and digital monitoring is included. Cabling for JNP-QSFP-100G-SR4: use a multimode trunk with MPO-12 connectors and correct polarity, OM3 or OM4. The headline reach is 70 m on OM3 · 100 m on OM4, so measure the installed link loss before ordering. The host needs a free QSFP28 cage that runs at 100G; Juniper's tool names EX4400, QFX5120-48Y, QFX5130-32CD among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Server and storage links to a top-of-rack switch
- Switch-to-switch links inside one data hall or comms room
- Building risers that already have OM3/OM4 multimode fibre
Before you order
- Confirm your switch or router model and software release support the JNP-QSFP-100G-SR4
- Use OM3 or OM4 multimode patch cords; reach drops sharply on OM1/OM2
- Parallel optics need MPO/MTP trunk or breakout cabling with the right polarity
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the JNP-QSFP-100G-SR4?
70 m on OM3 · 100 m on OM4.
What fibre does the JNP-QSFP-100G-SR4 use?
It runs over multimode fibre (MMF) with a MPO-12 connector at 850 nm.
Is the JNP-QSFP-100G-SR4 genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-QSFP-100G-SR4?
Juniper lists it for platform families including Juniper EX4400, Juniper QFX5120-48Y, Juniper QFX5130-32CD, Juniper QFX5230-64CD. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.