JNP-QSFP-100G-PSM4
100G-PSM4 QSFP28 transceiver, 1310 nm, single-mode, MPO-12
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-QSFP-100G-PSM4 at a glance
- 100G-PSM4 QSFP28 transceiver
- 1310 nm over single-mode fibre (SMF)
- Reach: 500 m on SMF
- Connector: MPO-12
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-QSFP-100G-PSM4 |
|---|---|
| Brand | Juniper |
| Standard | 100G-PSM4 |
| Form factor | QSFP28 |
| Data rate | 100 Gb/s |
| Wavelength | 1310 nm |
| Media | Single-mode fibre (SMF) |
| Reach | 500 m on SMF |
| Connector | MPO-12 |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper EX4400
- Juniper QFX5120-48Y
- Juniper QFX5130-32CD
- Juniper QFX5230-64CD
- Juniper QFX5700
- Juniper MX204
- Juniper MX304
- Juniper ACX7100-32C
Description
A 100G PSM4 QSFP28 using four parallel single-mode fibres per direction, part code 740-061406. Data-centre operators use it for 500 m spine-leaf runs where parallel single-mode trunks are available. Juniper marks it breakout capable for 4x25G on supported hosts. The MPO-12 interface uses angled-polish connectors, so cabling must match. Transmit wavelength is 1295 to 1325 nm and the range is 0 to 70 degrees C. Cabling for JNP-QSFP-100G-PSM4: use a parallel single-mode trunk with MPO-12 connectors, wired with APC polish and the right polarity. The headline reach is 500 m on SMF, so measure the installed link loss before ordering. The host needs a free QSFP28 cage that runs at 100G; Juniper's tool names EX4400, QFX5120-48Y, QFX5130-32CD among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Campus links between buildings over single-mode fibre
- Data-centre interconnects between halls or floors
- Aggregation and core uplinks where multimode reach is not enough
Before you order
- Confirm your switch or router model and software release support the JNP-QSFP-100G-PSM4
- Use single-mode (OS2) fibre and check the link budget for the full span
- Parallel optics need MPO/MTP trunk or breakout cabling with the right polarity
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the JNP-QSFP-100G-PSM4?
500 m on SMF.
What fibre does the JNP-QSFP-100G-PSM4 use?
It runs over single-mode fibre (SMF) with a MPO-12 connector at 1310 nm.
Is the JNP-QSFP-100G-PSM4 genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-QSFP-100G-PSM4?
Juniper lists it for platform families including Juniper EX4400, Juniper QFX5120-48Y, Juniper QFX5130-32CD, Juniper QFX5230-64CD. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.