JNP-100G-DAC-3M
100G DAC direct-attach cable, 3 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-100G-DAC-3M at a glance
- 100G DAC 3 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-100G-DAC-3M |
|---|---|
| Brand | Juniper |
| Standard | 100G DAC |
| Form factor | DAC |
| Data rate | 100 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 3 m cable |
| Connector | fixed (cable) |
| Cable length | 3 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10008
- Juniper EX4300
- Juniper ACX7100
- Juniper PTX10001
- Juniper MX2008
- Juniper SRX2300
- Juniper QFX10016
- Juniper EX4400
Description
JNP-100G-DAC-3M is a 3 m QSFP28 direct-attach copper cable that carries one 100 Gigabit Ethernet link between two QSFP28 ports. It reports no optical diagnostics, as there is no laser in the path. Juniper lists an operating temperature of 0° C to 70° C. The stated operating range runs 0° C to 70° C. Before ordering, look up the exact switch or router model and Junos release in the Juniper Hardware Compatibility Tool, since support differs by platform and port type. It suits spine-leaf cabling where both devices are close together. In the Juniper compatibility tool it carries part number 740-061001. Stocked as a genuine, new, sealed Juniper item. A 3 m run is typically used within a single rack, for example between a top-of-rack switch and a nearby device. Both ports must be QSFP28 and set for 100G.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the JNP-100G-DAC-3M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-100G-DAC-3M?
The JNP-100G-DAC-3M is a 3 m copper DAC with the plugs permanently attached.
Is the JNP-100G-DAC-3M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-100G-DAC-3M?
Juniper lists it for platform families including Juniper QFX10008, Juniper EX4300, Juniper ACX7100, Juniper PTX10001. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.