JNP-100G-4X25G-1M
100G to 4x25G DAC direct-attach cable, 1 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-100G-4X25G-1M at a glance
- 100G to 4x25G DAC 1 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-100G-4X25G-1M |
|---|---|
| Brand | Juniper |
| Standard | 100G to 4x25G DAC |
| Form factor | DAC |
| Data rate | 100 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 1 m cable |
| Connector | fixed (cable) |
| Cable length | 1 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5120
- Juniper EX4100
- Juniper ACX5448
- Juniper PTX10001
- Juniper MX304
- Juniper SRX2300
- Juniper QFX5130
- Juniper EX4400
Description
Built from 1 m of twinax, JNP-100G-4X25G-1M connects one 100G switch port to four separate 25G server ports. Listed maximum power is 0.5 W. Supported platforms are published per model, so confirm yours in the Juniper compatibility tool and do not assume a neighbouring model is covered. The 100G port is channelised into four 25G ports, and each SFP28 leg is an independent link. The 1 m length keeps the run short, which leaves little slack to manage behind the doors. The conductor is 30 AWG twinax. A new, genuine Juniper cable, shipped sealed. There is no optical monitoring, since the link is electrical end to end. The compatibility tool shows 720-068901 as the underlying part number. Typical use is feeding four 25G servers from a single 100G leaf switch port.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the JNP-100G-4X25G-1M
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-100G-4X25G-1M?
The JNP-100G-4X25G-1M is a 1 m copper DAC with the plugs permanently attached.
Is the JNP-100G-4X25G-1M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-100G-4X25G-1M?
Juniper lists it for platform families including Juniper QFX5120, Juniper EX4100, Juniper ACX5448, Juniper PTX10001. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.