JNP-100G-DAC-1M
100G DAC direct-attach cable, 1 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-100G-DAC-1M at a glance
- 100G DAC 1 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-100G-DAC-1M |
|---|---|
| Brand | Juniper |
| Standard | 100G DAC |
| Form factor | DAC |
| Data rate | 100 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 1 m cable |
| Connector | fixed (cable) |
| Cable length | 1 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5110
- Juniper EX4400
- Juniper ACX5448
- Juniper PTX10001
- Juniper MX2008
- Juniper SRX2300
- Juniper QFX5120
- Juniper EX4650
Description
JNP-100G-DAC-1M is a 1 m QSFP28 direct-attach copper cable that carries one 100 Gigabit Ethernet link between two QSFP28 ports. Wire gauge is listed as 30 AWG, which sets how stiff the cable feels. With only 1 m of cable, this one is meant for short, tidy connections close to the switch. The compatibility tool shows 740-061000 as the underlying part number. Typical use is switch-to-switch or switch-to-server connections at 100G inside a rack or between neighbours. Both ports must be QSFP28 and set for 100G. Genuine Juniper part, new and factory sealed. Confirm the host platform and software release against Juniper's compatibility listing first; the same cable is not accepted by every port on every chassis. Power draw is listed at up to 0.5 W. Juniper lists an operating temperature of 0° C to 70° C.
Typical uses
- Server to top-of-rack switch inside the same rack
- Short links between adjacent racks
- Low-power, low-latency switch interconnects
Before you order
- Confirm your switch or router model and software release support the JNP-100G-DAC-1M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-100G-DAC-1M?
The JNP-100G-DAC-1M is a 1 m copper DAC with the plugs permanently attached.
Is the JNP-100G-DAC-1M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-100G-DAC-1M?
Juniper lists it for platform families including Juniper QFX5110, Juniper EX4400, Juniper ACX5448, Juniper PTX10001. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.