SFP-10G-BXU-I=
10GBASE-BX10-U SFP+ transceiver, 1270 nm, single-mode, LC simplex
- Genuine Cisco
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
SFP-10G-BXU-I= at a glance
- 10GBASE-BX10-U SFP+ transceiver
- 1270 nm over single-mode fibre (SMF)
- Reach: 10 km on single-strand SMF
- Connector: LC simplex
- Digital optical monitoring (DOM) for light levels and temperature
- Industrial temperature rating (typically -40 to 85 °C)
- Genuine Cisco part, new, factory sealed
Specifications
| Part number | SFP-10G-BXU-I= |
|---|---|
| Brand | Cisco |
| Standard | 10GBASE-BX10-U |
| Form factor | SFP+ |
| Data rate | 10 Gb/s |
| Wavelength | 1270 nm |
| Media | Single-mode fibre (SMF) |
| Reach | 10 km on single-strand SMF |
| Connector | LC simplex |
| Digital optical monitoring | Supported |
| Temperature range | Industrial (IND) |
| Condition | New, factory sealed |
Description
The upstream half of an industrial single-fibre 10 gigabit pair, transmitting at 1270 nm and receiving at 1330 nm, with diagnostic monitoring. It is meant for remote ends of fronthaul, access and outdoor links where fibre strands are limited and wide temperature tolerance is needed. Pair it with SFP-10G-BXD-I at the opposite site. Reach is 10 km on single-mode fibre. The SFP-10G-BXU-I is a SFP+ form-factor part for SFP+ ports on 10 gigabit switches, routers and server adapters. It runs over a single fibre strand and is specified for the industrial temperature range of minus 40 to 85 degrees Celsius. Its listed reach is 10 km on single-strand SMF. The wavelength split inside the module means ordinary duplex patch cords cannot be used; plan the link with one strand and match each end to its opposite number. Because compatibility is decided per platform and software release, confirm the exact host device in the Cisco compatibility matrix before ordering.
Typical uses
- Links where only a single fibre strand is available
- Doubling capacity on existing fibre plant
- Access and fronthaul links to remote cabinets
Before you order
- Confirm your switch or router model and software release support the SFP-10G-BXU-I=
- BiDi optics work in matched pairs: one upstream (U) and one downstream (D) end
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the SFP-10G-BXU-I=?
10 km on single-strand SMF.
What fibre does the SFP-10G-BXU-I= use?
It runs over single-mode fibre (SMF) with a LC simplex connector at 1270 nm.
Is the SFP-10G-BXU-I= genuine and what condition is it?
It is a genuine Cisco part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.