EX-SFP-10GE-SR
10GBASE-SR SFP+ transceiver, 850 nm, multimode, LC duplex
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
EX-SFP-10GE-SR at a glance
- 10GBASE-SR SFP+ transceiver
- 850 nm over multimode fibre (MMF)
- Reach: 300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1
- Connector: LC duplex
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | EX-SFP-10GE-SR |
|---|---|
| Brand | Juniper |
| Standard | 10GBASE-SR |
| Form factor | SFP+ |
| Data rate | 10 Gb/s |
| Wavelength | 850 nm |
| Media | Multimode fibre (MMF) |
| Reach | 300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1 |
| Connector | LC duplex |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper EX4400
- Juniper EX4300
- Juniper EX4100
- Juniper EX3400
- Juniper QFX5120-48Y
- Juniper QFX5130-32CD
- Juniper MX204
- Juniper ACX7024
Description
A 10 Gigabit short-reach SFP+ optic, listed by Juniper under part code 740-021308 for its EX switches and a broad set of routers and firewalls. It is the usual choice for server-to-top-of-rack and switch-to-switch links inside a building, where multimode cabling is already installed. The 850 nm laser draws at most 1 W and runs from 0 to 70 degrees C. Duplex LC connectors and digital diagnostics for temperature, bias, transmit and receive power are included. Cabling for EX-SFP-10GE-SR: use a duplex multimode patch cable with LC connectors, OM3 or OM4 preferred for the longest reach. The headline reach is 300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1, so measure the installed link loss before ordering. The host needs a free SFP+ cage that runs at 10G; Juniper's tool names EX4400, EX4300, EX4100 among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Metro and long-haul links between sites
- Service-provider aggregation over dark fibre
- Long campus spans beyond the 10 km class
Before you order
- Confirm your switch or router model and software release support the EX-SFP-10GE-SR
- Use single-mode (OS2) fibre and check the link budget for the full span
- On short test links an attenuator may be needed to avoid overloading the receiver
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the EX-SFP-10GE-SR?
300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1.
What fibre does the EX-SFP-10GE-SR use?
It runs over multimode fibre (MMF) with a LC duplex connector at 850 nm.
Is the EX-SFP-10GE-SR genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the EX-SFP-10GE-SR?
Juniper lists it for platform families including Juniper EX4400, Juniper EX4300, Juniper EX4100, Juniper EX3400. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.