GLC-SX-MM-RGD=
1000BASE-SX SFP transceiver, 850 nm, multimode, LC duplex
- Genuine Cisco
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
GLC-SX-MM-RGD= at a glance
- 1G 1000BASE-SX SFP transceiver
- 850 nm over multimode fibre (MMF)
- Reach: 550 m on OM2 · up to 1000 m on OM3/OM4 per datasheet
- Connector: LC duplex
- Digital optical monitoring (DOM) for light levels and temperature
- Industrial temperature rating (typically -40 to 85 °C)
- Genuine Cisco part, new, factory sealed
Specifications
| Part number | GLC-SX-MM-RGD= |
|---|---|
| Brand | Cisco |
| Standard | 1000BASE-SX |
| Form factor | SFP |
| Data rate | 1 Gb/s |
| Wavelength | 850 nm |
| Media | Multimode fibre (MMF) |
| Reach | 550 m on OM2 · up to 1000 m on OM3/OM4 per datasheet |
| Connector | LC duplex |
| Digital optical monitoring | Supported |
| Temperature range | Industrial (IND) |
| Condition | New, factory sealed |
Description
A ruggedised variant of the 850 nm gigabit multimode optic, rated for the industrial temperature range of minus 40 to 85 degrees Celsius. It suits factory floors, outdoor cabinets, substations and similar spots where a standard commercial-grade module would run outside its limits. Fibre requirements match the commercial SX part: duplex multimode with LC PC or UPC connectors and no APC polish. The GLC-SX-MM-RGD is a SFP form-factor part for gigabit SFP ports found on access switches, routers and industrial Ethernet gear. It runs over a duplex fibre pair and is specified for the industrial temperature range of minus 40 to 85 degrees Celsius. Its listed reach is 550 m on OM2 · up to 1000 m on OM3/OM4 per datasheet. Check the link budget against the real fibre plant, including connectors and splices, before relying on the headline distance. Because compatibility is decided per platform and software release, confirm the exact host device in the Cisco compatibility matrix before ordering.
Typical uses
- Server and storage links to a top-of-rack switch
- Switch-to-switch links inside one data hall or comms room
- Building risers that already have OM3/OM4 multimode fibre
Before you order
- Confirm your switch or router model and software release support the GLC-SX-MM-RGD=
- Use OM3 or OM4 multimode patch cords; reach drops sharply on OM1/OM2
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the GLC-SX-MM-RGD=?
550 m on OM2 · up to 1000 m on OM3/OM4 per datasheet.
What fibre does the GLC-SX-MM-RGD= use?
It runs over multimode fibre (MMF) with a LC duplex connector at 850 nm.
Is the GLC-SX-MM-RGD= genuine and what condition is it?
It is a genuine Cisco part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.