EX-SFP-1GE-LX
1000BASE-LX SFP transceiver, 1310 nm, single-mode, LC duplex
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
EX-SFP-1GE-LX at a glance
- 1G 1000BASE-LX SFP transceiver
- 1310 nm over single-mode fibre (SMF)
- Reach: 10 km on SMF · 550 m on MMF (mode-conditioning)
- Connector: LC duplex
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | EX-SFP-1GE-LX |
|---|---|
| Brand | Juniper |
| Standard | 1000BASE-LX |
| Form factor | SFP |
| Data rate | 1 Gb/s |
| Wavelength | 1310 nm |
| Media | Single-mode fibre (SMF) |
| Reach | 10 km on SMF · 550 m on MMF (mode-conditioning) |
| Connector | LC duplex |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper EX4400
- Juniper EX4300
- Juniper EX4100
- Juniper EX3400
- Juniper EX2300
- Juniper EX4650-48Y
- Juniper MX204
- Juniper MX304
Description
A 1000BASE-LX SFP for single-mode fibre, listed by Juniper for EX series switches and many routing, security and wireless-adjacent platforms. It carries Gigabit Ethernet between buildings on a campus, or between an access closet and a distribution room that is too far for short-wave optics. The laser transmits in the 1270 to 1355 nm window and reaches 10 km on standard single-mode fibre. Juniper also lists 550 m over multimode fibre. Operating range is -5 to 70 degrees C. Cabling for EX-SFP-1GE-LX: use a duplex single-mode (OS2) patch cable with LC connectors. The headline reach is 10 km on SMF · 550 m on MMF (mode-conditioning), so measure the installed link loss before ordering. The host needs a free SFP cage that runs at 1G; Juniper's tool names EX4400, EX4300, EX4100 among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Metro and long-haul links between sites
- Service-provider aggregation over dark fibre
- Long campus spans beyond the 10 km class
Before you order
- Confirm your switch or router model and software release support the EX-SFP-1GE-LX
- Use single-mode (OS2) fibre and check the link budget for the full span
- On short test links an attenuator may be needed to avoid overloading the receiver
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the EX-SFP-1GE-LX?
10 km on SMF · 550 m on MMF (mode-conditioning).
What fibre does the EX-SFP-1GE-LX use?
It runs over single-mode fibre (SMF) with a LC duplex connector at 1310 nm.
Is the EX-SFP-1GE-LX genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the EX-SFP-1GE-LX?
Juniper lists it for platform families including Juniper EX4400, Juniper EX4300, Juniper EX4100, Juniper EX3400. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.