GLC-BX-D=
1000BASE-BX10-D SFP transceiver, 1490 nm, single-mode, LC simplex
- Genuine Cisco
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
GLC-BX-D= at a glance
- 1G 1000BASE-BX10-D SFP transceiver
- 1490 nm over single-mode fibre (SMF)
- Reach: 10 km on single-strand SMF
- Connector: LC simplex
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Cisco part, new, factory sealed
Specifications
| Part number | GLC-BX-D= |
|---|---|
| Brand | Cisco |
| Standard | 1000BASE-BX10-D |
| Form factor | SFP |
| Data rate | 1 Gb/s |
| Wavelength | 1490 nm |
| Media | Single-mode fibre (SMF) |
| Reach | 10 km on single-strand SMF |
| Connector | LC simplex |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Description
A bidirectional gigabit module that sends at 1490 nm and receives at 1310 nm over a single strand of fibre. It is the downstream half of a matched pair. Use it where fibre is scarce, for instance on a hub site that feeds a remote cabinet and must halve the number of strands consumed. It must be paired with the upstream module, GLC-BX-U, at the far end. Diagnostic monitoring is supported and the interface is a single LC. The GLC-BX-D is a SFP form-factor part for gigabit SFP ports found on access switches, routers and industrial Ethernet gear. It runs over a single fibre strand and is specified for the commercial temperature range of 0 to 70 degrees Celsius. Its listed reach is 10 km on single-strand SMF. The wavelength split inside the module means ordinary duplex patch cords cannot be used; plan the link with one strand and match each end to its opposite number. Because compatibility is decided per platform and software release, confirm the exact host device in the Cisco compatibility matrix before ordering.
Typical uses
- Links where only a single fibre strand is available
- Doubling capacity on existing fibre plant
- Access and fronthaul links to remote cabinets
Before you order
- Confirm your switch or router model and software release support the GLC-BX-D=
- BiDi optics work in matched pairs: one upstream (U) and one downstream (D) end
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the GLC-BX-D=?
10 km on single-strand SMF.
What fibre does the GLC-BX-D= use?
It runs over single-mode fibre (SMF) with a LC simplex connector at 1490 nm.
Is the GLC-BX-D= genuine and what condition is it?
It is a genuine Cisco part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.