SFPP-10GE-SR
10GBASE-SR SFP+ transceiver, 850 nm, multimode, LC duplex
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
SFPP-10GE-SR at a glance
- 10GBASE-SR SFP+ transceiver
- 850 nm over multimode fibre (MMF)
- Reach: 300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1
- Connector: LC duplex
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 2 Juniper platform families (see Compatibility)
Specifications
| Part number | SFPP-10GE-SR |
|---|---|
| Brand | Juniper |
| Standard | 10GBASE-SR |
| Form factor | SFP+ |
| Data rate | 10 Gb/s |
| Wavelength | 850 nm |
| Media | Multimode fibre (MMF) |
| Reach | 300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1 |
| Connector | LC duplex |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper MX204
- Juniper ACX7024
Description
An SFP+ 10GBASE-SR module carried under Juniper's SFPP naming and part code 740-031980-01, listed mainly for routers, firewalls and carrier switches. It serves 10 Gigabit handoffs inside a facility, such as a router-to-switch link or a firewall interface to a distribution layer. The module uses an 850 nm transmitter over duplex multimode fibre, supports digital monitoring and is rated for 0 to 70 degrees C. Cabling for SFPP-10GE-SR: use a duplex multimode patch cable with LC connectors, OM3 or OM4 preferred for the longest reach. The headline reach is 300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1, so measure the installed link loss before ordering. The host needs a free SFP+ cage that runs at 10G; Juniper's tool names MX204, ACX7024 among the platforms where this code is supported, and the model page also gives the minimum software release for each platform. Clean the connectors before insertion and keep dust caps on unused ports.
Typical uses
- Server and storage links to a top-of-rack switch
- Switch-to-switch links inside one data hall or comms room
- Building risers that already have OM3/OM4 multimode fibre
Before you order
- Confirm your switch or router model and software release support the SFPP-10GE-SR
- Use OM3 or OM4 multimode patch cords; reach drops sharply on OM1/OM2
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the SFPP-10GE-SR?
300 m on OM3 · 400 m on OM4 · 82 m on OM2 · 33 m on OM1.
What fibre does the SFPP-10GE-SR use?
It runs over multimode fibre (MMF) with a LC duplex connector at 850 nm.
Is the SFPP-10GE-SR genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the SFPP-10GE-SR?
Juniper lists it for platform families including Juniper MX204, Juniper ACX7024. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.