QDD-4X100G-AOC-20M
400G to 4x100G AOC AOC transceiver, multimode, fixed (cable)
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QDD-4X100G-AOC-20M at a glance
- 400G to 4x100G AOC 20 m active optical cable
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | QDD-4X100G-AOC-20M |
|---|---|
| Brand | Juniper |
| Standard | 400G to 4x100G AOC |
| Form factor | AOC |
| Data rate | 400 Gb/s |
| Media | Multimode fibre (MMF) |
| Reach | 20 m cable |
| Connector | fixed (cable) |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5130
- Juniper MX301
- Juniper QFX5130E
- Juniper QFX5220
- Juniper QFX5230
- Juniper QFX5240
- Juniper QFX5241
- Juniper QFX5700
Description
QDD-4X100G-AOC-20M is a 20 m active optical breakout cable with a QSFP-DD end and four QSFP28 ends for 4x100G. Supplied new, in the original sealed packaging. Typical use is spreading one 400G port across four 100G devices over fibre. At 20 m the cable can span adjacent cabinets, with enough length to loop through a cable manager. Juniper's data gives a maximum power draw of QSFP-DD: 12 W; QSFP28: 5 W. Juniper lists an operating temperature of 0° C to 70° C. Check the host device against the Juniper compatibility tool before purchase, because listings are made per model and per release. Digital diagnostics are listed for the cable, covering temperature, voltage, bias current, and optical power. Operating temperature is listed as 0° C to 70° C. In the Juniper compatibility tool it carries part number 740-160037.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the QDD-4X100G-AOC-20M
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the QDD-4X100G-AOC-20M?
The QDD-4X100G-AOC-20M is a 20 m active optical cable with the plugs permanently attached.
Is the QDD-4X100G-AOC-20M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QDD-4X100G-AOC-20M?
Juniper lists it for platform families including Juniper QFX5130, Juniper MX301, Juniper QFX5130E, Juniper QFX5220. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.