QDD-4X100G-2P5M
400G to 4x100G DAC direct-attach cable, 2.5 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QDD-4X100G-2P5M at a glance
- 400G to 4x100G DAC 2.5 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | QDD-4X100G-2P5M |
|---|---|
| Brand | Juniper |
| Standard | 400G to 4x100G DAC |
| Form factor | DAC |
| Data rate | 400 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 2.5 m cable |
| Connector | fixed (cable) |
| Cable length | 2.5 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5130
- Juniper PTX10001
- Juniper MX301
- Juniper QFX5130E
- Juniper QFX5220
- Juniper QFX5230
- Juniper QFX5700
- Juniper QFX5700E
Description
QDD-4X100G-2P5M is a 2.5 m passive copper breakout cable with one QSFP-DD plug and four QSFP56 plugs. Listed maximum power is 1.5 W. Juniper's tool lists its part number as 720-095807. The stated operating range runs 0° C to 70° C. Genuine Juniper part, new and factory sealed. Typical use is feeding four 100G hosts or switch ports from a single 400G port. The QSFP-DD port must be configured for breakout operation. With only 2.5 m of cable, this one is meant for short, tidy connections close to the switch. There is no optical monitoring, since the link is electrical end to end. Confirm the host platform and software release against Juniper's compatibility listing first; the same cable is not accepted by every port on every chassis.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the QDD-4X100G-2P5M
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the QDD-4X100G-2P5M?
The QDD-4X100G-2P5M is a 2.5 m copper DAC with the plugs permanently attached.
Is the QDD-4X100G-2P5M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QDD-4X100G-2P5M?
Juniper lists it for platform families including Juniper QFX5130, Juniper PTX10001, Juniper MX301, Juniper QFX5130E. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.