QDD-4X100G-2M
400G to 4x100G DAC direct-attach cable, 2 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QDD-4X100G-2M at a glance
- 400G to 4x100G DAC 2 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | QDD-4X100G-2M |
|---|---|
| Brand | Juniper |
| Standard | 400G to 4x100G DAC |
| Form factor | DAC |
| Data rate | 400 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 2 m cable |
| Connector | fixed (cable) |
| Cable length | 2 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5130
- Juniper PTX10001
- Juniper MX301
- Juniper QFX5130E
- Juniper QFX5220
- Juniper QFX5230
- Juniper QFX5240
- Juniper QFX5241
Description
A 2 m passive twinax breakout, QDD-4X100G-2M runs a QSFP-DD connector on one side to four 100G QSFP56 connectors on the other. This is a genuine Juniper part, new in its sealed bag. The conductor is 28 AWG twinax. Operating temperature is listed as 0° C to 70° C. The QSFP-DD port must be configured for breakout operation. It reports no optical diagnostics, as there is no laser in the path. Compatibility is decided per platform and release, so verify your exact model in Juniper's online tool before placing an order. At 2 m it suits links inside one cabinet or between two adjacent racks. The 400G port is split into four 100G links, each with its own QSFP56 connector. Juniper's tool lists its part number as 720-095806.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the QDD-4X100G-2M
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the QDD-4X100G-2M?
The QDD-4X100G-2M is a 2 m copper DAC with the plugs permanently attached.
Is the QDD-4X100G-2M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QDD-4X100G-2M?
Juniper lists it for platform families including Juniper QFX5130, Juniper PTX10001, Juniper MX301, Juniper QFX5130E. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.