QDD-4X100G-1M
400G to 4x100G DAC direct-attach cable, 1 m
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QDD-4X100G-1M at a glance
- 400G to 4x100G DAC 1 m direct-attach copper cable
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | QDD-4X100G-1M |
|---|---|
| Brand | Juniper |
| Standard | 400G to 4x100G DAC |
| Form factor | DAC |
| Data rate | 400 Gb/s |
| Media | Copper twinax (DAC) |
| Reach | 1 m cable |
| Connector | fixed (cable) |
| Cable length | 1 m |
| Digital optical monitoring | Not supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5130
- Juniper PTX10001
- Juniper MX301
- Juniper QFX5130E
- Juniper QFX5220
- Juniper QFX5230
- Juniper QFX5700
- Juniper QFX5700E
Description
A 1 m passive twinax breakout, QDD-4X100G-1M runs a QSFP-DD connector on one side to four 100G QSFP56 connectors on the other. In the Juniper compatibility tool it carries part number 720-095805. Juniper's data gives the wire gauge as 30 AWG. The QSFP-DD port must be configured for breakout operation. Offered as a genuine Juniper product in new, sealed condition. Listed maximum power is 1.5 W. Operating temperature is listed as 0° C to 70° C. Typical use is feeding four 100G hosts or switch ports from a single 400G port. The 1 m length keeps the run short, which leaves little slack to manage behind the doors. It is worth checking the Juniper Hardware Compatibility Tool for your specific chassis and software version, as listings are made model by model.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the QDD-4X100G-1M
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the QDD-4X100G-1M?
The QDD-4X100G-1M is a 1 m copper DAC with the plugs permanently attached.
Is the QDD-4X100G-1M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QDD-4X100G-1M?
Juniper lists it for platform families including Juniper QFX5130, Juniper PTX10001, Juniper MX301, Juniper QFX5130E. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.