QDD-400G-AOC-10M
400G AOC AOC transceiver, 850 nm, multimode, fixed (cable)
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
QDD-400G-AOC-10M at a glance
- 400G AOC 10 m active optical cable
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | QDD-400G-AOC-10M |
|---|---|
| Brand | Juniper |
| Standard | 400G AOC |
| Form factor | AOC |
| Data rate | 400 Gb/s |
| Wavelength | 850 nm |
| Media | Multimode fibre (MMF) |
| Reach | 10 m cable |
| Connector | fixed (cable) |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5130
- Juniper ACX7100
- Juniper PTX10001
- Juniper MX10004
- Juniper SRX4700
- Juniper QFX5130E
- Juniper ACX7332
- Juniper PTX10002
Description
QDD-400G-AOC-10M is a 10 m QSFP-DD active optical cable for 400 Gigabit Ethernet, built with OM4 multimode fibre and fixed optical ends. Digital diagnostics report case temperature, supply voltage, bias current, and transmit and receive power. Genuine Juniper part, new and factory sealed. Confirm the host platform and software release against Juniper's compatibility listing first; the same cable is not accepted by every port on every chassis. Operating temperature is listed as 0° C to 70° C. Juniper records the part under number 740-090167. At 10 m the cable can span adjacent cabinets, with enough length to loop through a cable manager. Juniper lists an operating temperature of 0° C to 70° C. Juniper's data gives a maximum power draw of 12 W. Typical use is 400G switch-to-switch links in a spine-leaf fabric.
Typical uses
- Rack-to-rack links longer than copper DAC can reach
- Lighter, thinner cable runs in dense racks
- High-speed links without separate optics and patch cords
Before you order
- Confirm your switch or router model and software release support the QDD-400G-AOC-10M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the QDD-400G-AOC-10M?
The QDD-400G-AOC-10M is a 10 m active optical cable with the plugs permanently attached.
Is the QDD-400G-AOC-10M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the QDD-400G-AOC-10M?
Juniper lists it for platform families including Juniper QFX5130, Juniper ACX7100, Juniper PTX10001, Juniper MX10004. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.