JNP-100G-AOC-20M
100G AOC AOC transceiver, multimode, fixed (cable)
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-100G-AOC-20M at a glance
- 100G AOC 20 m active optical cable
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-100G-AOC-20M |
|---|---|
| Brand | Juniper |
| Standard | 100G AOC |
| Form factor | AOC |
| Data rate | 100 Gb/s |
| Media | Multimode fibre (MMF) |
| Reach | 20 m cable |
| Connector | fixed (cable) |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX10002
- Juniper EX4400
- Juniper ACX5448
- Juniper PTX10001
- Juniper MX10004
- Juniper SRX2300
- Juniper QFX10008
- Juniper EX4650
Description
The JNP-100G-AOC-20M links two QSFP28 ports over 20 m of fibre, with the optical ends fixed to the cable. The internal Juniper part number shown for it is 740-064981. It suits leaf-to-spine connections within a hall. The stated operating range runs 0° C to 70° C. Stocked as a genuine, new, sealed Juniper item. Diagnostics listed include laser bias current, receive power, case temperature and supply voltage; transmit power is not reported. Power draw is listed at up to 3.5 W. The 20 m length is a common choice for end-of-row or neighbouring-rack connections. Confirm the host platform and software release against Juniper's compatibility listing first; the same cable is not accepted by every port on every chassis. Operating temperature is listed as 0° C to 70° C. The optical ends are sealed inside the connectors, so there is no fibre end-face to clean.
Typical uses
- Rack-to-rack links longer than copper DAC can reach
- Lighter, thinner cable runs in dense racks
- High-speed links without separate optics and patch cords
Before you order
- Confirm your switch or router model and software release support the JNP-100G-AOC-20M
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-100G-AOC-20M?
The JNP-100G-AOC-20M is a 20 m active optical cable with the plugs permanently attached.
Is the JNP-100G-AOC-20M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-100G-AOC-20M?
Juniper lists it for platform families including Juniper QFX10002, Juniper EX4400, Juniper ACX5448, Juniper PTX10001. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.