SFP-10G-LRM=
10GBASE-LRM SFP+ transceiver, 1310 nm, multimode, LC duplex
- Genuine Cisco
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
SFP-10G-LRM= at a glance
- 10GBASE-LRM SFP+ transceiver
- 1310 nm over multimode fibre (MMF)
- Reach: 220 m on 62.5 µm and OM2 MMF · 300 m on SMF
- Connector: LC duplex
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Cisco part, new, factory sealed
Specifications
| Part number | SFP-10G-LRM= |
|---|---|
| Brand | Cisco |
| Standard | 10GBASE-LRM |
| Form factor | SFP+ |
| Data rate | 10 Gb/s |
| Wavelength | 1310 nm |
| Media | Multimode fibre (MMF) |
| Reach | 220 m on 62.5 µm and OM2 MMF · 300 m on SMF |
| Connector | LC duplex |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Description
A 1310 nm 10 gigabit optic built to run over legacy multimode fibre by using electronic dispersion compensation. Network teams reach for it when old 62.5 micron cabling inside a building cannot be replaced yet but must carry 10 gigabit Ethernet. Datasheet reach is 220 m on 62.5 micron and OM2 fibre, 100 m on 50 micron 400 MHz-km fibre, and 300 m on single-mode. Duplex LC connectors apply. The SFP-10G-LRM is a SFP+ form-factor part for SFP+ ports on 10 gigabit switches, routers and server adapters. It runs over a duplex fibre pair and is specified for the commercial temperature range of 0 to 70 degrees Celsius. Its listed reach is 220 m on 62.5 µm and OM2 MMF · 300 m on SMF. Check the link budget against the real fibre plant, including connectors and splices, before relying on the headline distance. Because compatibility is decided per platform and software release, confirm the exact host device in the Cisco compatibility matrix before ordering.
Typical uses
- Server and storage links to a top-of-rack switch
- Switch-to-switch links inside one data hall or comms room
- Building risers that already have OM3/OM4 multimode fibre
Before you order
- Confirm your switch or router model and software release support the SFP-10G-LRM=
- Use OM3 or OM4 multimode patch cords; reach drops sharply on OM1/OM2
- Prices exclude import duties and taxes in your country (DAP)
FAQ
What is the reach of the SFP-10G-LRM=?
220 m on 62.5 µm and OM2 MMF · 300 m on SMF.
What fibre does the SFP-10G-LRM= use?
It runs over multimode fibre (MMF) with a LC duplex connector at 1310 nm.
Is the SFP-10G-LRM= genuine and what condition is it?
It is a genuine Cisco part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.