JNP-QSFP-AOCBO-5M
40G to 4x10G AOC AOC transceiver, multimode, fixed (cable)
- Genuine Juniper
- New, factory sealed
- Pay by card, PayPal or T/T
T/T bank transfer
- Tax invoiceIssued by Rabash Technologies Pte. Ltd., Singapore
JNP-QSFP-AOCBO-5M at a glance
- 40G to 4x10G AOC 5 m active optical cable
- Digital optical monitoring (DOM) for light levels and temperature
- Commercial temperature rating (typically 0 to 70 °C)
- Genuine Juniper part, new, factory sealed
- Listed for 8 Juniper platform families (see Compatibility)
Specifications
| Part number | JNP-QSFP-AOCBO-5M |
|---|---|
| Brand | Juniper |
| Standard | 40G to 4x10G AOC |
| Form factor | AOC |
| Data rate | 40 Gb/s |
| Media | Multimode fibre (MMF) |
| Reach | 5 m cable |
| Connector | fixed (cable) |
| Digital optical monitoring | Supported |
| Temperature range | Commercial (COM) |
| Condition | New, factory sealed |
Compatibility
- Juniper QFX5110
- Juniper EX4400
- Juniper QFX5120
- Juniper EX4600
- Juniper QFX5130
- Juniper QFX5130E
- Juniper QFX5200
- Juniper QFX5210
Description
JNP-QSFP-AOCBO-5M is a 5 m active optical breakout cable: one QSFP+ end fans out to four SFP+ ends for 4x10G. Diagnostics are limited: the QSFP+ end reports only case temperature and supply voltage, and the SFP+ ends report nothing. Stocked as a genuine, new, sealed Juniper item. The stated operating range runs 0° C to 70° C. Before ordering, look up the exact switch or router model and Junos release in the Juniper Hardware Compatibility Tool, since support differs by platform and port type. Breakout mode must be set on the QSFP+ port in Junos. Each SFP+ leg is an independent 10G link once the QSFP+ port is configured for 4x10G. Juniper lists an operating temperature of 0° C to 70° C. The compatibility tool shows 740-066715 as the underlying part number. With only 5 m of cable, this one is meant for short, tidy connections close to the switch. Operating temperature is listed as 0° C to 70° C.
Typical uses
- Splitting one high-speed port into four lower-speed links
- Connecting a spine or aggregation port to four servers or switches
- Increasing port density on leaf switches
Before you order
- Confirm your switch or router model and software release support the JNP-QSFP-AOCBO-5M
- Enable port breakout (channelisation) on the host before connecting
- Measure the run: choose the shortest length that reaches without strain
- Prices exclude import duties and taxes in your country (DAP)
FAQ
How long is the JNP-QSFP-AOCBO-5M?
The JNP-QSFP-AOCBO-5M is a 5 m active optical cable with the plugs permanently attached.
Is the JNP-QSFP-AOCBO-5M genuine and what condition is it?
It is a genuine Juniper part, new, factory sealed, sold by an independent reseller and invoiced by Rabash Technologies Pte. Ltd., Singapore.
Which platforms support the JNP-QSFP-AOCBO-5M?
Juniper lists it for platform families including Juniper QFX5110, Juniper EX4400, Juniper QFX5120, Juniper EX4600. Check the full list above and your software release before ordering.
Shipping and returns
Ships from Singapore. Delivery options are confirmed for your destination.
Shipping detailsSee the returns and warranty policy for applicable terms.
Returns and warrantyQuotes are valid for 7 days, payable by card, PayPal or T/T.
Request a quoteRelated part numbers
Product guides & buying advice
technix.guru is an independent reseller and is not affiliated with, sponsored by or endorsed by the brand owners. All trademarks belong to their respective owners.